产品详情
SEV-4306D

产品简介

The Server Technology® Switched CDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides accurate measurement of current(billing-grade), voltage, active power, apparent power, power factor, crest factor,and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The Switched “Master" CDU can be connected to a Switched “Link" CDU to extend the network access to the redundant or secondary power feed.

产品特点

STV-4306 (36xC13 + 12xC19) 3Ph with PIPS
Item #Available Input
Voltages

Rated

Amperage

Available Input CordOutletsDimensions
(L x W x D)
STV-4306D
SEV-4306D*		208V 3-Phase Delta, 50/60 Hz  ≤ 48A
(60A peak)		IEC 60309 3P+G 9hr Blue Plug10'(3m), Top Cord
(36) IEC 60320/C13
(12) IEC 60320/C19		(1753 x 83 x 57 mm)
69.0 x 3.25 x 2.75 in.
STV-4306Y
SEV-4306D*		208V 3-Phase Delta, 50/60 Hz  ≤ 48A
(60A peak)
IEC 60309 3P+N+G 9hr Blue Plug10'(3m), Top Cord
(36) IEC 60320/C13
(12) IEC 60320/C19		(1753 x 83 x 57 mm)
69.0 x 3.25 x 2.75 in.
STV-4306V
SEV-4306V*		208V 3-Phase Delta, 50/60 Hz  ≤ 40A
(50A peak)
CS8365 Plug,10'(3m), Top Cord
(36) IEC 60320/C13
(12) IEC 60320/C19		(1753 x 83 x 57 mm)
69.0 x 3.25 x 2.75 in.
*SEV refers to the expansion CDU
Additional Features and Specifications
Standards

> cTUVus Mark to UL 60950-1:2007
> CAN/CSA 22.2 No. 60950-1-07
> EMC to EN 55022 Class A, EN 55024, CISPR 22 Class A
> FCC Class A, Part 15
> RoHS/WEEE

Communications
> 10/100 Mbps Ethernet (RJ-45 connector)
> RS-232 serial (RJ-45 connector)
> Two (2) temperature/humidity sensor inputs (4P4C)
> Link port (RJ-12)
> Web-browser GUI and command-line-interface (CLI)HTTP/HTTPS, SSLv3/TLSv1, SSHv2, Telnet, SNMPv2cand v3 (GET,SET, Traps), IPv4 and IPv6,LDAPv3/LDAPS, TACACS+, RADIUS


Branch Circuit Protection
> UL489 compliant circuit breakers, 2-pole, 20A
> Three (3) branches: XY, YZ, and ZX phase pairs
> Current Rating: ≤ 48A
> Voltage Rating: 208V, 50/60Hz

Accessories
>EMTH-1-1 Combination Temperature/Humidity Probe, 10ft (3m)
>EMCU-1-1B Environmental Monitor adding:
    -Two (2) EMTH-1-1 temperature/humidity ports (one probe included)
    -One (1) EMWS-1-1 water sensor port (probe sold separately)
     -Four (4) dry contact (NO/NC) monitoring points
     -One (1) 8-bit analog-to-digital converter (0 to 5VDC)
>SPM (Sentry Power Manager):
     -Monitor and manage multiple PDUs from a single point
     -Monitor and manage alarm conditions-Create reports and trends on stored data
     -Analyze power usage per phase-Optional appliance or virtual version
     -VMware Ready
>Device / Output Locking Power Cords-Multiple options available
     -Contact Server Technology for details.
>Mounting Brackets-Buttons (KIT-0020) included for tool-less mounting